100%
CO / CQ Đầy đủ
Bảo Hành
12 Tháng Chính Hãng
Giao Hàng
Toàn Quốc 24-48h
EGC-KOKUSAI SIP ADL-980 Máy hàn chì tự động
Đơn giá tham khảo (chưa VAT):
Liên hệ báo giá dự án Chiết khấu đặc biệt theo số lượng đơn hàng B2B
Hỗ Trợ Kỹ Thuật & Mua Hàng B2B Dự Án:
Cần tư vấn chọn model, thông số kỹ thuật, hồ sơ thầu, hoặc yêu cầu kiểm định hiệu chuẩn ISO 17025?
Thông Số Kỹ Thuật & Chi Tiết Sản Phẩm
Features
It is possible to unite with the characteristic of each work, and for a maximum of 9 steps to subdivide, and to program the up-and-down speed and dip time to a solder dip tub by application of microcomputer technology. This dip data can input up-and-down speed, stop time, and the amount of up-and-down movements for every step, respectively, and can set up the optimal soldering conditions for a work.
To 50 kinds, the inputted dip data is memorized by backup RAM and can be called at any time if needed. Dealing also with a plan substitute quickly is possible.
Adoption of the new method realized not less than 30% of improvement in the speed compared with old equipment. (Our comparison) Moreover, removal of a solder icicle is also performed simultaneously.
Adoption of the new method realized not less than 30% of improvement in the speed compared with old equipment. (Our comparison) Moreover, removal of a solder icicle is also performed simultaneously.
The input of dip data can be easily performed by key operation, looking at LCD (liquid-crystal-display screen) on a panel.
Specification
| Lead frame attachment machine | FI-930T type use |
|---|---|
| Lead frame standard size cut length | MAX 280mm |
| An application lead frame size and a substrate size | W：65mm or less D：40mm or less L1：8～20mm L2：55mm or less T：0.6～8mm (It is clamper exchange when T is 9?13 mm.) A clamper is an option. |
| The direction of a work flow | The left -> right |
| Work conveyance | Belt conveyance -> mechanism zipper system |
| Flux application | Dip system (sub tub up-and-down system) |
| Preheating system | Far-infrared heater（0～200℃） |
| Soldering system | Dip system (the solder sub tub up-and-down system by a pulse motor, a 0.1-mm step arbitrary setting good, and a display are liquid crystal display) |
| Baton time | About 12 seconds (it contains for about 3 seconds solder immersion time) |
| Dip system | An arbitrary setup in key operation is possible till 0 to 9.9 seconds. |
| Solder surface dregs removal | Each time, it is based on a scraper. |
| Solder icicle removal | It is based on a ceramic heater. |
| Work recovery | it is based on an exclusive career -- dropping |
| Memory function | 50 kinds (they are an arbitrary setup and liquid crystal display by key operation, such as the amount of soldering up-and-down movements, immersion time, and up-and-down speed) |
| Power supply | 200V (single phase), 50/60 Hz, 30A |
| Common sky pressure | Dry air 5kg/cm2 Air pressure display (panel side) |
| Outside dimension | L abbreviation 1,910 x W 985 x H 1,390mm |
| Weight | About 250 kg |
| Solder tub capacity | About 20 kg |
| Painting color | ECG standard color (2.5V7.6/1.4 leather color) |
Maintenance and calibration :
► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd
Email: sales@semiki.com
Office tel: +84 28 2253 3522
~DOING OUR BEST FOR YOU~Sản Phẩm Cùng Nhóm
Xem tất cả EGC-KOKUSAI →
EGC-KOKUSAI
Báo giá B2B
Đơn giá: Liên hệ báo giá
EGC-KOKUSAI
Báo giá B2B
Đơn giá: Liên hệ báo giá
EGC-KOKUSAI
Báo giá B2B
Đơn giá: Liên hệ báo giá
EGC-KOKUSAI
Báo giá B2B
Đơn giá: Liên hệ báo giá