An impulse test machine (DWX) is used as a controller, and an interchange machine (WTX), resistance meter and Hi pot tester are controlled. Automatic examination is possible.

The test cables are changed into 6 from 4 examination cables.

A setup of each circuit of arbitrary Hi-Lo is possible.

The number of the maximum steps is changed into 18 steps from 14 steps.

Condition data of 49 models in the main part has been changed to 99 models・The CF models has been changed to 50 models.

Interlock functional loading

WTX-typeⅡ	Number of the maximum steps	18 step
WTX-typeⅡ	Corresponding procedure	RS-232C control and external I/O control
Impulse tester	Applied voltage	DWX-01A(50V～1000V)/DWX-05Aor05PD(0.5kV～5.0kV)
	Judgment method	A comparison system with a master waveform
	Examination step	6 step
	Test time	0.5 sec/1 step
	Number of memory of master waveform	700 models in CF memory card
	Corresponding procedure	RS-232C control and external I/O control
DC resistance examination	Corresponding model	TSURUGA：3585/3565（Corresponding schedule） HIOKI：RM3545/RM3544/3541
	Examination step	6 step
	Test time	0.5 sec/1step
	Corresponding procedure	RS-232C control
Insulation resistance test Withstand voltage test	Corresponding model	TSURUGA：8525/8505（Corresponding schedule） KIKUSUI：TOS-5200/TOS920X/TOS930X Others：External I/O control article
	Examination step	6 step
	Test time	Arbitrary time setup
	Corresponding procedure	RS-232C control or external I/O control

Connection apparatus (arbitrary)

External control apparatus	PC	Corresponding procedure: RS－232C control
External control apparatus	PLC	Corresponding procedure: RS-232C control or external I/O control

CONNECTION

Accessories

Operation manual	×１	RS－232C cable	×Required number	Test machine connecting cable	×１
Test cable	×６	Controller power cable	×１	Cable of resist pressure test	×１
Resistance test cable	×１	Earth cable	×１	Control BOX	×１

■Specification and a design may be changed without a preliminary announcement for improvement reasons etc. ■There may be difference in a color, textures, etc. may be on the photograph which are written on the catalog during printing. ■Although an effort is made to indicate exact information about the contents of this catalog, if there should be a point of advice , such as a clerical error, please give a notice to sales promotion division of our company.

Maintenance and calibration :

► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP