Máy đo xung cuộn dây, đo cách điện cuộn dây EGC-KOKUSAI DWX-300LI DWX-01LI

 

The model is specialized in the insulation test of chip power inductor coil.

4 terminal testing circuits can be performed sufficiently with applied high voltage to ultra-low inductance coil. Maximum of 1000v (shown on screen) impression is possible to a minimum of 1μH coil.

Detailed response waveform is displayed as twice as many wave-form sampling resolution by testing machine.

High-speed test can be done with shortest test time of 30msec with 1 pulse application, and mass-production in line is possible. Each function of a test mode" and the "breakdown test mode" which performs detailed evaluation is carried in one set.

Impression of one pulse, high-speed test can be done without a judgment in shortest test time of 10msec, and mass-production line is possible.

It also suits to a choke , motor coil, and coil with few numbers of turns besides a chip power inductor.

	DWX-300LI	DWX-01LI	DWX-05A
Application	precision test	Ultra-low inductance	Ordinary coil parts At large
Minimum	0.1μH～10mH	0.1μH～10mH	10μH～100mH
Maximum	3～300V	10～1200V	5000V
Setting voltage	0.3V	1.2V	100V
Maximum	1μH during 300V	1μH during 1000V	10μH during 1000V
Waveform	200MHz fairly		100MHz
Minimum test time （During 1 pulse impression）	HI Speed Mode Without judgment 10msec With judgment 18msec	Test mode Without screen display 53msec With screen display 108msec	200msec
Judgment function	Area (Area% ) ,Waveform difference area (Dif Area), Peak voltage (Peak Stb%) Electric discharge level (Laplacian), Waveform extinction ratio (Laplacian%) Break-down-voltage evaluation test (BDV) Resist pressure evaluation test by manual operation (Manual BDV)		Area (Area) Waveform difference area (Dif Area) Amount of electric ischarge (Flutter) Electric discharge level (Laplacian)
Test circuit	Test circuit		2 terminals
Test cable range	Recommended 1.5m （maximum 3m）		Recommended 1.6m （maximum 3m）
PD test	Failure		PD Symetry
Additional function	Number of master waveform memory 196 models, External control by extended RS-232C and I/O and CF memory card, Result Log preservation, Screen hard copy preservation
External I/O control signal	Impression trigger (Trig), High-speed interface timing corresponds for inspection hair driers		The start of test (Start), Under an examination (Busy) etc. ,External control
External size	345(W)×185(H)×360(D)
Accessories	1.5m of 4 terminal examination cables		1.6m of examination cables
Power supply	AC100/115/220/240 ±5% Changeable

Maintenance and calibration : 

► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~