IMADA ZTS-LC-5000N thiết bị đo lực nén loadcells rời 5000N/500Kgf

IMADA Japan

ZTS force gauge with Load Cells LC series

Model: ZTS-LC-5000N

IMADA ZTS-LC series Load cells LC for compression with Connect to an indicator ZTS Series.  Load cells exclusively for compression Ideal for a narrow space due to their slim shapes. Designed to mount or bond it on pressing machine and the like. Coin shaped is a standard load cell dedicated to compression, with capacity of 20kN. Compressive force is applied to the protruding part of the tip to measure. Model: ZTS-LC-5000N  Range: 5000N / 500Kgf accuracy : Within ±2.0%FS minimum resolution1N (0.001kN)

• Facilitates the compression testing in narrow space or unstable environment due to its thin and compact design
• Separated sensor model force gauges with a dedicated sensor available for a certain measurement purpose
• Custom-made model with flexible arm available for safety and certainly reaching the testing position

Pic.: IMADA ZTS-LC-5000N compression force gauge ( loadcells LC 5000N) at Semiki's warehouse Range: 5000N / 500Kgf accuracy : Within ±2.0%FS minimum resolution1N (0.001kN) High sampling rate (2000Hz) for accurate results Sampling Rate 2000 data / sec at maximum Display update 16 / sec Battery 6.5 hours (2 hours for re-charging) Output : USB, RS232C / ±2VDC analog output (D/A), Comparator 3 steps (-NG/OK/+NG), Overload alarm [embedyt] https://www.youtube.com/watch?v=H3IO3mBT-K8[/embedyt] Video: How to measure compression IMADA ZTA/ZTS-LM serries ( Vietnamese) Caution:  • This product is designed for force measurement only. Do not use it for other purpose. • Please pay close attention to install this products. • Never apply strong force or impact especially on the sensing direction. • Do not apply bending or torsion stress when setting up the sensing shaft to a measuring object. • Do not use in the condition of rapid temperature changes, high temperature, high humidity, near water and dusty place. • The contents may be changed without notice in advance. • Please note the allowable values are a little different by the selecting unit of the amplifier. Maintenance and calibration :  ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Ins DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~