IMADA ZTA SERIES thiết bị đo lực kéo nén điện tử đa chức năng

IMADA

Digital Force Gauge

Model: ZTA Series

High functionality type digital force gauge has capacity of 1000N and is equipped with additional functions to ZTS series, such as input/output of displacement and data saving to USB. Next series digital force gauges with firmware Ver.5 or later offers improved measurement stability with less noise, and optional functions and software can be downloaded from the dedicated website (IMADA Connected). Some functions require connection to separately-sold products.

Model	ZTA
Feature	Advanced model with various functions such as data saving in USB memory stick, displacement I/O and more.
Accuracy	+/-0.2%F.S.+/-1digit
Unit of measurement (*1)	N, kgf, lbf (*2)
Display	4-digit Organic EL
Display update	16 / sec
Sampling rate	2000 data / sec at maximum (*3)
Battery	8 hours (2 hours charge) (*4)
Safe overload rating	Approx.200%F.S.
Operating environment	Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH
Function	Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping,Time display, 1st/2nd peak,Displacement detection at force peak value, Displacement zero reset at selected force, setting lock
Output	USB, RS232C, Mitutoyo digimatic (*5), 2 VDC analog output (D/A), Comparator 3 steps (-NG/OK/+NG), Overload alarm, Sub comparator 2 steps (output of large or small judgment), USB flash drive, Displacement.
Overload warning	Approx.110%F.S. (Warning message and alarm )
External connecting switch	SEND (a point of contact holding), Zero reset, Peak ON/OFF setting
Available linear scales (*6)	– Online driver output (a line receiver according to RS422/485 must be built in.) – Open collector output (Voltage drop between contacts must be smaller than 0.5V.
Weight	Approx.490g (*7)
Dimensions	Please refer to dimensions.
Accessory(*6)	AC adapter, Inspection certificate, CD driver (including simple software for data logging), Attachments (The set of attachments varies according to range.), USB cable,Carrying case, Adaptor for USB flash drive.

*1 These are the specifications for International model.  Please note that this unit is different from Japanese domestic model and international one. *2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN. [kgf indication] The indication of 2N and 5N models is gf. [lbf indication] The indication of 2N and 5N models is ozf. *3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec) *4 The battery is more consumed when connected to USB flash drive or a linear scale. *5 Not always available for Mitutoyo digimatic products. *6 Some linear scales could not be available even if they meet the mentioned specifications. *7 Weight is slightly different according to range.

Picture: imada ZTA-50N ( 50N/ 0.01N ) at Semiki's warehouse

Picture: imada ZTA-200N ( 200N/ 0.1N ) at Semiki's warehouse

Picture: IMADA ZTA-500N ( 500N/ 0.1N ) at Semiki's warehouse

Specifications

for High Functionality Model Digital Force Gauge ZTA series

[Calibration Certificate]
Semiki Corp offer calibration certificate at extra charge.

[Cautions]
- The contents may be changed without prior notice.
- All products are designed for measurement purpose only.
- Do not copy and use this content without authority.
- Please note that the capacity is dependent on the displayed unit. Please contact us for details.

Maintenance and calibration :  ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Ins   DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~