THIẾT BỊ ĐO BỘ BÁM DÍNH BỀ MẶT SƠN BEVS S2202

 

 

BEVS Cross Hatch Cutter

Model:  BEVS 2202 

 Cross Hatch Cutter is designed and manufactured according to
 ISO 2409-1992, GB/T9286-98, B

 

• Check for correct selection of cutter type:

⇒ 2202/1C is designed for hard substrates with a coating up to 60 microns.

 

⇒ 2202/2C for hard substrates up to 60 microns, with the benefit of 11 teeth to produce 100 squares, enables % values to be obtained from the results.

 

⇒ 2202/3C intermediate, suitable for hard and softer substrates up to 60 microns.

 

⇒ 2202/4C for both soft & hard substrates with a coating thickness from 61 - 120 microns.

 

⇒ 2202/6C for both hard & soft substrates coating thickness 121 - 250 microns.

 

♦ Obtain Pressure Sensitive Adhesive Tape (for hard substrates).

 

 

► The Cross Cutters Tester conform with the requirements of: ISO2409-1992, GB/T9286-98,BS3900 E6, ASTM D3359.

►  In order to achieve consistent results it is recommended that the test be conducted in accordance with the stated test methods.

 

 

Picture: BEVS 2202/2C full set 

 

BEVS 2202/1C Cross Hatch Cutter (1MM 6 Blades)

 

BEVS 2202/2C Cross Hatch Cutter (1MM 11 Blades)

 

BEVS 2202/3C Cross Hatch Cutter (1.5MM 6 Blades)

 

BEVS 2202/4C Cross Hatch Cutter (2MM 6 Blades)

 

BEVS 2202/6C Cross Hatch Cutter (3MM 6 Blades)

 

Note: The Cross Hatch Cutters are not suitable for coatings thicker than

 250 microns or for textured coatings

 

Maintenance and calibration : 

 

► We also have calibration certificate attached ( optional )
► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI CORP

 

 

 

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~