Name: TAIYO Goot CP series dây bấc hàn loại bỏ chất hàn ( 1.0mm ~3.5mm)
Brand: TAIYO ELECTRIC
SKU: CP series
Price: 79000 VND
Availability: InStock

TAIYO ELECTRIC Japan

CP SERIES

Desoldering Wire WICK

No-clean halogen-free

TAIYO Goot CP Series LEAD-FREE DESOLDERING Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load.

RMA base flux. High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. Can be used for precision PCBs safely. [embedyt] https://www.youtube.com/watch?v=Cfcl9dg5wWs[/embedyt] TAIYO Goot CP Series I How to use

Adopting ‘Halogen-free’ flux Eco-friendly

Adopting ‘Halogen-free’ flux
Suitable width can be chosen from 1.0 mm to 3.5 mm for your work
1.5 m rolls and 30 m rolls are available

Model: CP-1015 : 1.0mm x 1.5 m CP-1515 : 1.5mm x 1.5 m CP-2015 : 2.0mm x 1.5 m CP-3015 : 3.0mm x 1.5 m CP-3515 : 3.5mm x 1.5 m

Specification

Fulx type: No clean Fulx classification: ROL0 (IPC J-STD-004C) Halide content [mass%]: 0.00% Copper corrosion test: PASS (JIS Z 3197) Corrosion test with copper mirror　: 　 No evidence of mirror breakthrough (IPC-TM-650) Insulation resistance test : 1×108 Ω or Higher（JIS Z 3197） Voltage withstand humidity test: No Ion Migration (JIS Z 3197)

Pic.: TAIYO Electric Japan Goot wick CP-2515 ( 2.5mm x 1.5m ) at Semiki's warehouse Usage/Applications Desoldering wire is used to remove solder from an elemental device or from patterns on a printed circuit board (PCB) from which surface-mounted devices such as BGA (ball grid array) have been removed. Place the desoldering wire on where you want to desolder, and put a soldering iron on top to melt a solder joint.