SCS 770048 thiết bị giám sát điểm nối đất chung an toàn tĩnh điện (10 kΩ)

SCS; U.S.A

Common Point Ground Monitor Model: SCS 770048

The SCS 770048 is a Common Point Ground Monitor used to verify the integrity of the resistance path from an ESD (Electrostatic Discharge) common ground point to the building's electrical ground.

• Continuous Ground Monitoring: It constantly checks that the path-to-ground for outlets is intact, meeting ANSI/ESD S6.1 standards for verifying wiring orientation.
• ESD Control Hub: It serves as a central grounding point with 12 connection points (6 banana jacks and 6 screw terminals) for wrist straps, mats, carts, and tools.
• Visual/Audible Alerts: Instantly alerts operators with a red LED and buzzer if the outlet wiring is incorrect or the ground path fails.
• Flexible Installation: Equipped with mounting tabs, allowing it to be installed on workbenches or equipment for high visibility

• AC Outlet Continuous Monitor Continuously monitors the path-to-ground integrity of the outlet; meets the ANSI/ESD S6.1 requirement for verifying wiring orientation
• Visual Common Point Ground Indicator Identifies a properly wired AC outlet that may be used for grounding purposes of an ESD Control Plan

[embedyt] https://www.youtube.com/watch?v=OKGmHNYcw34[/embedyt] Specification Power Input : 100-240 VAC, 50/60 Hz Ground Conductor Resistance Limit: 10 kilohms (nominal) Weight : 0.35 lbs (~0.16 kg) Operating Temperature: 10°C to 35°C Humidity Limits : Max 80% up to 85°F, decreasing to 50% at 85°F Connectivity: 6 Banana Jacks & 6 Screws for #8 ring terminals Compliance : ANSI/ESD S6.1, ESD TR 12-01