RENESAS E2 Emulator Programmer bộ giả lập gỡ lỗi tích hợp trên chip

Renesas Electronics Corporation

E2 emulator [RTE0T00020KCE00000R]

The E2 emulator is also available as a flash memory programmer with flash programming software (Renesas Flash Programmer). The E2 emulator is an advanced on-chip debugging emulator and flash programmer developed with the concept of greater efficiency in development. The combination of its high-speed downloading and various software and hardware solutions will contribute to reducing development times.  

• Support for new MCUs with next-generation cores MCUs that have next-generation cores, such as those of the RH850/E2x series (which incorporate the G4MH core) or the RX66T group (which incorporate the new RXv3 core for the RX family) can be debugged.
• Features for for RL78 and RX Families
  • Support for the input and output of external triggers For example, you can set up the stopping of programs or of the measurement of waveforms by simply using the test lead which comes with the E2 emulator to connect the emulator to an external measuring instrument with the CS+ integrated development environment or the e² studio integrated development environment.
  • Current Consumption Tuning Solution In conjunction with the QE for Current Consumption, a dedicated tool for measuring current drawn, the E2 emulator is capable of the following items. These shorten the time taken to tune currents.
    • Measuring current with the E2 emulator alone
    • Stopping a program when an excessive current is detected
    • Visualizing the relationship between program operations and current

[embedyt] https://www.youtube.com/watch?v=U399d5g0zwo[/embedyt]

• Features for RH850 Family
  • CAN Communications Time Measurement Solution The following CAN-related tasks are possible in conjunction with the CS+ integrated development environment or the MULTI® integrated development environment (GHS MULTI) from Green Hills Software. This eases verifying the speed of CAN communications in terms of system requirements.
    • Measuring the reception processing time in CAN communications with the E2 emulator alone
    • Stopping a program when the reception processing time exceeds the design value
    • Visualizing the history of CAN communications
  • Support for the input and output of external triggers For example, you can set up the stopping of programs or of the measurement of waveforms by simply using the test lead which comes with the E2 emulator to connect the emulator to an external measuring instrument with the CS+ integrated development environment or the MULTI® integrated development environment (GHS MULTI) from Green Hills Software.
  • Software Trace Function  The function enables users to view the execution history of the programs such as the values of the program counter (PC) and the register values together with the debug instructions of MCUs for RH850 family with the CS+ integrated development environment or the MULTI® integrated development environment (GHS MULTI) from Green Hills Software. Using this feature, unlike the conventional method of “tracing data with the settings of events and conditions,” users can generate the execution history data such as the PC values and register values simply by inserting the debug instructions to the location where you like to check in the program.his feature is available in all RH850 family MCUs, including the ones do not have internal trace memory when debugging.

Fig: RENESAS E2 emulator on-chip debugging emulator ( RTE0T00020KCE00000R ) at Semiki’s warehouse System Configuration (Programming With Renesas Flash Programmer V3) On-board programming: Supported User interfaces: 14pin 2.54mm pitch connector (7614-6002: from 3M Japan, 2514-6002: from 3M Limited) 20pin 1.27mm pitch connector (FTSH-110-01-L-DV-K: from Samtec) 10pin 1.27mm pitch connector (FTSH-105-01-L-DV-K: from Samtec, FTSH-105-01-L-DV: from Samtec without a marking for matching the position of the connector; keying shroudNote1) PC Interface USB 2.0, full speed and high speed Connection to the system Connection to the system is via the user system interface cable which comes with the product (signals for connection vary with the type of the target MCU). Operating voltage range: 1.8V to 5.5V (depends on the target MCU) Power supply from Emulator: Supply current: Up to 200mA, Supply voltage: 1.8V to 5.0V Compliance with overseas standards: European Standards: EN 55022 Class A, EN 55024, US FCC Standard: FCC part 15 Class A Maintenance and calibration :  ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI ins DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~