PEAK Systems PCAN-USB X6 (IPEH-004062) bộ chuyển đổi giao tiếp 6 cổng CAN FD

PEAK-System Technik GmbH · Germany

PCAN-USB X6 6-Channel CAN and CAN FD Interface for High-Speed USB 2.0

PCAN-USB X6 with D-Sub connectors IPEH-004062

PCAN-USB X6 with M12 circular connectors galv isolated IPEH-004063

PCAN-USB X6 with D-Sub connectors galv. isolated IPEH-004064

The PEAK-System PCAN-USB X6 (IPEH-004062) is a high-performance, 6-channel CAN FD interface designed for high-speed USB 2.0 connectivity. This specific model variant features non-isolated D-Sub connectors and is intended for use in environments like test benches and automotive product line testing

• Channels: 6 independent High-speed CAN channels (ISO 11898-2).
• Protocols: Supports CAN 2.0 A/B and CAN FD (ISO and Non-ISO standards switchable).
• Data Rates: CAN FD bit rates up to 12 Mbit/s for data fields; nominal CAN bit rates up to 1 Mbit/s.
• Connector Type: 9-pin D-Sub (CiA 303-1 assignment).
• Power Supply: Requires an external supply of 8 to 30 V DC via a provided Phoenix Contact mating connector. It is not powered via USB.
• Housing: Robust aluminum profile casing.
• USB Connectivity: High-speed USB 2.0 (compatible with 1.1 and 3.0) with an integrated downstream USB port for daisy-chaining other devices.

PEAK-Systems IPEH-002022 PCAN-USB FD CAN-FD interface for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0) 6 High-speed CAN channels (ISO 11898-2) Comply with CAN specifications 2.0 A/B and FD CAN FD support for ISO and Non-ISO standards switchable CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s CAN bit rates from 25 kbit/s up to 1 Mbit/s FPGA implementation of the CAN FD controller NXP TJA1044GT CAN transceiver Alternative pluggable transceiver modules on request Galvanic isolation on the CAN connection up to 300 V (only for IPEH-004063 and IPEH-004064) Time stamp resolution 1 µs Status LEDs for CAN channels, USB upstream, and power supply CAN connection via D-Sub, 9-pin or M12 circular connectors, 5-pin (pin assignment of both connectors in accordance with CiA® 106) Aluminum casing with increased Ingress Protection IP64 (only for IPEH-004063) High-speed USB 2.0 downstream port (only for IPEH-004062 and IPEH-004064) CAN termination can be activated through solder jumpers, separately for each CAN channel Measurement of bus load including error frames and overload frames on the physical bus Induced error generation for incoming and outgoing CAN messages Voltage supply from 8 to 30 V Extended operating temperature range from -40 to +85 °C (-40 to +185 °F) Pic.: peak system PCAN-USB X6 IPEH-004062 at Semiki's warehouse The PEAK-System PCAN-USB X6 (IPEH-004062) is primarily used to connect a computer to multiple CAN or CAN FD networks through a single USB port. Because it can manage up to six independent channels simultaneously, it is designed for complex environments where multiple data streams need to be monitored or controlled.

• Automotive Test Benches: Ideal for Hardware-in-the-Loop (HIL) simulations where a PC must interact with various vehicle electronic control units (ECUs) at once.
• Product Line Testing: Used in factory settings for end-of-line testing of CAN-based products to ensure they communicate correctly before shipping.
• High-Speed Data Transfer: Specifically useful for CAN FD (Flexible Data rate) applications, allowing for larger data volumes (up to 64 bytes) and faster bit rates (up to 12 Mbit/s) compared to classic CAN.
• Industrial Multi-Network Connectivity: Provides a central interface for industrial plants or machinery that rely on multiple CAN buses for operation and diagnostics.

DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~