Name: NOISEKEN 18-00086B máy xác định thời gian giữ điện áp ESD Simulator
Brand: NOISEKEN
SKU: 18-00086B
Price: 149790000 VND
Availability: InStock

NOISEKEN Japan

ESD Voltage Meter

MODEL : 18-00086B

For measuring the hold time and output voltage of electrostatic testers

Easy measurement of tester specifications for the Air Discharge testing ! Hold time measurement function IEC 61000-4-2 standard specifies the voltage “Hold Time” as a tester specification related to the Air discharge testing. The Hold Time is defined as “the time interval during which the output voltage decreases by 10% or less due to leakage before the discharge” and is required to be “at least 5 seconds”. By using this product, the voltage “hold time” can be easily measured. Also, the output voltage specified in the IEC 61000-4-2 Standard can be easily measured without using a high-voltage probe or voltmeter.

For measuring the hold time and output voltage of electrostatic testers The ESD voltage meter MODEL: 18-00086B is a device that can measure the voltage holding time (holding voltage after 5 seconds) and output voltage, which are the tester specifications during the air discharge test in IEC 61000-4-2. The measured voltage is displayed on a 7-segment LED with peak and holding voltage values.

For measuring the hold time and output voltage of electrostatic testers ESS-S3011A/GT-30RA ● Easily measure the Hold Time, the tester specification for air-discharge testing. ● Measure the output voltage from ±2kV to 30kV. ● Monitor the measured voltage waveform by connecting to an oscilloscope. ● Compact, lightweight and easy to carry. [embedyt] https://www.youtube.com/watch?v=7_ZuL5eYyY0[/embedyt]

■ Measuring Holding Voltage 1. Connect the alligator clip on the end of the GND cable of the discharge gun to the GND terminal of the ESD voltage meter . 2. Set the electrostatic tester to Air Discharge mode and the output voltage: set to the voltage set a the ESD voltage meter. 3. Press the【START】switch on the electrostatic tester to charge the discharge gun, then make contact of the discharge tip of the ESD GUN to the GND terminal of the ESD voltage meter. After eliminating the high voltage, press the trigger switch on the discharge gun while keeping the discharge tip in contact with the ESD input terminal of the ESD voltage meter.

Specification

Maintenance and calibration :

► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Inc