Name: NF CORP 2326A, ZM2329,ZM2393 bộ đồ gá dùng cho máy LCR
Brand: NF CORP
SKU: 2326A
Availability: PreOrder

NF Corp Japan

Test Fixtures and Leads for LCR Meter ZM2371/ZM2372/ZM2376

LCR Meter ZM2371/ZM2372/ZM2376 Benchtop LCR Meter Series that Achieves High-speed, High-precision

Stable Measurements NF's ZM series LCR meters cover a wide frequency range, from the low-frequency region of 1 mHz up to 5.5 MHz. Supports a wide range of applications, from materials research to component production lines, by means of high-speed, low measurement fluctuation.

Test Fixtures and Leads (sold separately)

Accurate and easy-to-perform measurements

A variety of measurement fixtures are available for various applications.

*Measurement frequencies that take into account errors are recommended.

General-purpose components Test leads provide 4-terminal measurements. Accurate measurement is possible to low impedance. Kelvin clip leads enable one clip to be used for two electrically insulated opposing electrodes.

2324 Four-terminal alligator-clip test leads

Use these test leads with low-impedance four-terminal components, including those which have separate current supply terminals and voltage test terminals. ZM2391 Three-terminal alligator-clip test leads A three-terminal type is also available for simpler measurements.

Measurement frequency: ≤ 100 kHz

2325AL

2325A (L/M) Kelvin clip test leads

The two test lead clips enable four-terminal connections. The 2325A can be used to test large or unusually shaped components that cannot be easily inserted into the direct test fixture. Select between two types: the standard L type or the M type with smaller clips.

Measurement frequency: ≤ 100 kHz

[M type]

[L type]

ZM2392 Kelvin clip test leads

The ZM2392 provides test leads for simpler measurements.

Measurement frequency: ≤ 20 kHz

ZM2391 Three-terminal alligator-clip test leads

A three-terminal type is also available for simpler measurements.

Measurement frequency: ≤ 20 kHz

Lead components

ZM2363 Test fixture

Test fixture that makes 4-terminal measurements as easy as inserting the leads into the sample. To match the size of the components, the spacing of the measurement terminals can be adjusted.

Measurement frequency: ≤ 10 MHz

Chip components (Test Fixture) Test fixture for measuring surface-mounted components with a 2-terminal connection. Since a cable is not used, stray capacitance and residual impedance are small, enabling accurate open and short correction.

ZM2394H Chip test fixture

	Measurement frequency: ≤ 36 MHz
	Supported component size: 0603[JIS] / 0201 [EIA] (0.3mm thick) to 14 mm (square)

ZM2393 Chip test fixture

	Measurement frequency: ≤ 1.2 MHz
	Supported component size: 1608 [JIS] / 0603 [EIA] to 5750 [JIS] / 2220 [EIA]

Chip components (Test Leads) Chip component test lead in a 3-terminal configuration with shielded measurement contacts. Stray capacitance is small, enabling easy measurement of small-capacity capacitors.

ZM2366 Chip component test leads

	Measurement frequency: ≤ 10 MHz
	Tip spacing: 1 to 8 mm (typ.)

2326A Chip component test leads

	Measurement frequency: ≤ 1.2 MHz
	Tip spacing: 10 to 8 mm (typ.)

DC bias voltage adapter Adapter for applying a DC bias voltage of ±40 V to the sample. This adapter provides easy connection to the LCR meter and test fixture. (4-terminal pair configuration) ZM2328

ZM2328 (For ZM2371 and ZM2372) ZM2328

ZM2329 (For ZM2376) Maintenance and calibration : ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Ins