MALCOM DS-11 Dip Tester máy phân tích nhiệt độ bể hàn nhúng (0～300℃)

The Malcom DS-11 Dip Tester dual wave measurement system. Attain vital soldering performance information with just one device. The Malcom DS-11 Dip Tester is a self-contained instrument used for measuring and analyzing critical parameters in wave soldering and selective soldering processes for quality control in electronics manufacturing

Features & Benefits:

• The self contained DS-11 rides along the conveyor like a PCB.
• Measures the record's maximum PCB topside preheat temperature.
• Confirms flux and solder levels.
• Measures and records the maximum temperature and dwell times of both solder waves.
• Programable temperature profiles make it possible to monitor 50ms sampling temperatures of the preheat & solder temperature sensors, in addition to the conventional management items.

Automatic soldering equipment tester Dip tester DS-11 　 The information required for managing flow soldering equipment (preheat temperature, solder temperature, dip time) can be measured simply by placing it on the conveyor and running it through. ■ The standard for flow soldering bath management, the dip tester, has been redesigned. ■ Equipped with USB communication and profile measurement functions, and enables more advanced management using dedicated software. ■ Includes a cooling stand to quickly cool the device and also serves as a stand to protect the sensor. Pic: MALCOM Diptester DS-11 (0～300℃) at Semiki’s warehouse By connecting via USB and using the included software, you can determine whether measurement results are pass/fail and manage them.The temperature profile measurement function makes it possible to monitor the temperature profile by 0.1 second sampling of the preheat and solder temperature sensors, in addition to the conventional control items. We offer an optional heat-resistant cover that can be used with nitrogen furnaces and other devices with high thermal loads. Equipped with a new dip time sensor, it enables more accurate measurements. The Malcom DS-11 Dip Tester includes a dedicated cooling stand as part of its standard equipment, which both cools the device quickly after use in high-temperature soldering environments and protects its sensors. The included stand for the Malcom DS-11 serves a dual purpose: Rapid Cooling: It is designed to quickly cool down the device after it has been run through a flow soldering machine to measure preheat and solder temperatures. Sensor Protection: The stand also acts as a protective housing or base for the temperature sensors when the device is not in use. The Malcom DS-11 Dip Tester is used to measure and analyze key parameters of the selective soldering process in electronics manufacturing. It is a self-contained device that travels along the conveyor line like a printed circuit board (PCB) to gather data on the soldering conditions.

• Temperature Analysis: Measures and records the maximum preheat temperature on the topside of the PCB and the maximum temperature of the solder waves.
• Dwell Time: Measures the contact time (dip time) of the PCB with the solder waves.
• Process Parameter Confirmation: Confirms the levels of flux and solder in the machine.
• Speed Measurement: Determines the X and Y axis moving speeds through the soldering process.
• Nozzle Assessment: Can individually assess the condition of up to five nozzles in multi-nozzle systems.
• Quality Control: The collected data and temperature profiles (sampled every 50ms) can be analyzed using dedicated software to perform pass/fail (OK/NG) judgments and manage quality control data without needing a PC during the measurement itself.

Specification