Kett FD-660 cân sấy ẩm hồng ngoại (80g/0.005g) phân tích độ ẩm

Kett Japan

 

Moisture Analyzers

Infrared Moisture Analyzer

Model: FD-660

  Despite its compact appearance, this infrared moisture meter is highly practical, with functions equivalent to higher-end models, such as an arbitrary mass sampling method and an auto-taring mechanism. It can measure the moisture content of many samples regardless of type or properties. It has a built-in "auto-taring mechanism" that can store 50 measurement data and adjust the zero point during measurement  

Features

User-friendly operation panel with LED

The LED on the control panel lights up to indicate the operations that the user can perform and to inform the user of the status of the device.

Eco-friendly organic carbon heater

The organic carbon heater, which is the heat source, does not contain halogen compounds or metals that pollute the environment. Its lifespan is 7,000 hours*, which is about four times longer than that of conventional infrared lamps. In addition, in the wavelength range (2.5 to 3 μm) where moisture reacts with heat, it emits more than twice as much infrared light compared to the general halogen heaters installed in other infrared moisture meters. This makes it possible to dry efficiently. *This shows the actual time of the infrared heater. It does not guarantee the actual lifespan.

Equipped with two types of measurement modes

The instrument is equipped with two measurement modes, "automatic stop mode" and "timed stop mode," allowing measurements to be performed under drying conditions that are best suited to the drying characteristics of the sample.

High-performance electronic balance and auto-taring mechanism

The built-in high-performance electronic balance can be calibrated using standard weights, etc. However, even with a high-performance balance, drift due to temperature changes at the component level during measurement is unavoidable. Therefore, like conventional models, this unit also has a built-in "auto-taring mechanism" that can adjust the zero point during measurement. This minimizes the effects of balance drift even during long-term measurements, enabling highly reliable measurements.

Equipped with data memory function

It has a data memory function that can store 50 measurement data items and output them all at once.

Measurement conditions can be registered

Equipped with 5 measurement condition storage numbers. By registering the measurement conditions of various samples to these numbers, measurement preparation can be made more smoothly.

Equipped with Pre Heat mode

Immediately after powering on or if the temperature inside the measuring device is not constant, errors may occur in the measurement. To eliminate these issues, this device is equipped with a PreHeat mode that allows preheating.

Stainless steel sample dish with a diameter of 110 mm

The large sample tray allows more sample to be taken, improving sample representativeness, and the ability to spread the sample thinly improves drying efficiency.

Can be connected to a printer or PC

By connecting to a printer (optional) or a PC and the data logger software "FDL-02" (optional), the drying state during measurement and the final measurement value can be printed and displayed. [embedyt] https://www.youtube.com/watch?v=h7tiz2mgDKs[/embedyt]  

Infrared Moisture Meter FD-660 Specifications

      Pic.: Infrared Moisture Analyzer Kett FD-660 (0-80g/0.005 g/0.01%) at Semiki's warehouse   Maintenance and calibration :  ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI ins DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522   ~DOING OUR BEST FOR YOU~