KANETEC demagnetizer KMD-20C bàn khử từ tính ( 100% ED/130mm/AC100V)

KANETEC JAPAN

TABLE TYPE DEMAGNETIZER KMD Series Model: KMD-20C

The KANETEC KMD-20C is a table-type demagnetizer used to remove residual magnetism from metallic workpieces. It is commonly used in precision mechanical production lines to ensure that parts do not attract metal debris, which could interfere with machining or assembly.

• Removing Residual Magnetism: Used on workpieces that have become magnetized during manufacturing processes like grinding or when held by magnetic chucks.
• Demagnetizing Hard-to-Clear Materials: It is powerful enough to demagnetize materials with high magnetism-holding power, such as high-speed steel (HSS), bearing steel, spring steel, and die steel.
• Electronic Components: Suitable for demagnetizing electronic circuit boards and small precision parts.

The KANETEC KMD-20C is a table-type demagnetizer at Semiki's warehouse

 Specifications

• Power Source: Single-phase 100 VAC (50/60 Hz).
• Power Capacity: 300 VA (Current: 3.0A).
• Working Rate: 100% ED (continuous power-on capability).
• Effective Demagnetizing Width: 130 mm (approx. 5.11 inches).
• Mass (Weight): 7 kg (approx. 15.4 lbs). 

• Width (B): 200 mm (7.87 in)/ Length (L): 120 mm (4.72 in)/ Height (H): 80 mm (3.15 in).
• Power Cord: 2 meters included; the 100V model typically comes with a ground plug.

1. Placement: Place the demagnetizer on a flat surface. Ensure no other metal objects are within 5 cm, as they may also be heated by induction.
2. Movement: Slowly move the workpiece across the demagnetizing surface in one direction.
3. Removal: To be effective, you must move the workpiece at least 20 cm away from the end of the demagnetizer before turning the device off or setting the piece down.
4. Thick Parts: For thick workpieces, pass both the front and back sides over the surface to ensure complete demagnetization.

• Material Compatibility: Powerful enough to demagnetize materials with high magnetism-holding power, including high-speed steel (HSS), bearing steel, nickel-chrome steel, and spring steel.
• Heat Dissipation: Engineered with high heat radiation performance to allow for long-term continuous operation without overheating.
• Operation Method: Generates an alternating magnetic field on the top surface. Users move workpieces across this surface and slowly away to remove residual magnetism.

Maintenance and calibration :  ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Ins DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~