HAKKO FFR551-20250-J dây bấc hàn loại bỏ chất hàn (2mm x 25m)
Cần tư vấn chọn model, thông số kỹ thuật, hồ sơ thầu, hoặc yêu cầu kiểm định hiệu chuẩn ISO 17025?
Thông Số Kỹ Thuật & Chi Tiết Sản Phẩm
HAKKO Japan
FR511 SERIES
Desoldering Wire WICK
No-clean halogen-free
Adopting ‘Halogen-free’ flux Eco-friendly
- Adopting ‘Halogen-free’ flux
- Suitable width can be chosen from 1.5 mm to 5 mm for your work
- 1.5 m rolls and 25 m rolls are available
HAKKO Solder wick FR-551 Series No-clean halogen-free. Made in Japan Model: FR551-20250-J 2mm width x 25m length
HAKKO Desoldering Wire WICK Solder wick Product code: FR551-20250-J (No-clean halogen-free 2mm width x 25m length) at Semiki’s warehouse
Specification:
Fulx type: No clean Fulx classification: ROL0 (IPC J-STD-004C) Halide content [mass%]: 0.00% Copper corrosion test: PASS (JIS Z 3197) Corrosion test with copper mirror : No evidence of mirror breakthrough (IPC-TM-650) Insulation resistance test : 1×108 Ω or Higher（JIS Z 3197） Voltage withstand humidity test: No Ion Migration (JIS Z 3197)
Usage/Applications
Desoldering wire is used to remove solder from an elemental device or from patterns on a printed circuit board (PCB) from which surface-mounted devices such as BGA (ball grid array) have been removed.
Place the desoldering wire on where you want to desolder, and put a soldering iron on top to melt a solder joint.
Suitable width can be chosen from 1.5 mm to 5 mm for your work
You can cut the WICK without switching to nippers after solder removal, improving work efficiency.
1.5 m rolls and 25 m rolls are available
DISTRIBUTED BY:
Semiki instrumentation Co., Ltd Email: sales@semiki.com Office tel: +84 979761016
~DOING OUR BEST FOR YOU~
Sản Phẩm Cùng Nhóm
Xem tất cả HAKKO →
SANKO ELECTRONIC
Có sẵn
OPTICON
Báo giá B2B
HAKKO
Báo giá B2B
HAKKO
Báo giá B2B