SUGISAKI Meter Japan

Separate type digital torque driver

Model:

WDISR-IP05 (2.0 ~ 500.0 [mN-m]) WDISR-IP5 (0.020 ~ 5.000 [N-m]) WDISR-IP50 (0.20 ~ 50.00 [N-m]) WDISR-IP200 (2.0 ~ 200.0 [N-m]) WDISR-IP500 (2.0 ~ 500.0 [N-m]) WDISR-IP1500 (20 ~ 1500 [N-m])

For managing various manual torque drivers and wrenches Manual torque tool management / built-in battery type The "DIS series" has become easier to use and has higher performance. It works with a personal computer or PLC to manage torque measurement more highly. For managing manual torque drivers and wrenches. Color display that can display various information. Data output is standard equipment for both USB and RS232C. A series of diverse lineups from up to 500mN・m (0.5N・m) to 1500N・m. Numerical values such as pass / fail conditions can be set up to 10 channels. Pass / fail judgment is clearly displayed in color. Built-in battery drive.

Works with "PC" and "PLC" Manual torque wrench management

Various commands can be input from PLC or personal computer. Finer torque management is possible with external control.

Command list Clear signal: Clears the display and outputs the held numerical value as data and saves it in memory. Measurement mode: Change the measurement mode. Measurement channel: Change individual channels for which conditions such as pass / fail judgment are set. Peak hold upper limit : Change the pass / fail judgment upper limit of the current channel. Peak hold lower limit: Change the pass / fail judgment lower limit of the current channel. Peak down lower limit: Change the peak down judgment start lower limit of the current channel. Real-time output lower limit: Changed the output lower limit of real-time output. Auto clear time: Changed the time to automatically clear after the measurement is completed. Buzzer notification: Changed the buzzer notification method.