CEDAR DIW-120 cờ lê định lực điện tử 2.0~120N.m, socket 1/2 inch

SUGISAKI Japan

CEDAR Digital torque wrench Model: DIW-120 

For tightening and final check of screws & bolts The wrench head part can rotate about 300 degrees! The eyes and the display board can be always parallel and improves operability. Lightweight and compact with integrated display ! Cordless type and improves operability. Enable to stably measure for long continuous use.Screw tightening counter function is also installed as standard. Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes. SUGISAKI Japan CEDAR Digital torque wrench Model: DIW-120 Range: 2.0～120N.m /20～1200 kgf.cm / 20～1040 lbf.in Accuracy: Reading ±0.5% (499 or less digit±3digit) Socket: 1/2 inch ( 12.7mm) Setup of count 1 to 99 count (count in a clockwise direction) Picture: Cedar digital torque Wrench DIW-120  at Semiki’s warehouse. Feature : • Ergonomic, light weight, rugged metal construction • Wrench head swivels 300° • Peak, Real Time and Peak Down measuring mode (selectable) •  800 data memory • Programmable High and Low set points with both audible beep and Green/ Red • LED indicator for uniform torque tightening or GO/NO GO testing •  Both CW and CCW operation •  USB output (ASCII format) •  Runs on internal Ni-MH batteries (12 hour use) •  CW step less one-way clutch adapter (DIW-20/75/120 only), AC charger and carrying case included.

Specification:

Maintenance and calibration :  ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Ins   DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~