CEDAR DI-9M-8 thiết bị kiểm tra lực mô men xoắn tua vít (0.020-8 N･m)

SUGISAKI Japan

CEDAR Electric screw driver Torque tester Model: DI-9M-8

Suitable for daily inspection of electric screw driver Using "OW joint" (joint which is unnecessary to rewind) Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings by switch channels even if the tightening term changes. Due to "OW Joint", able to mesures effectively without rewinding. SUGISAKI Japan CEDAR Electric screw driver Torque tester Model: DI-9M-8 Measuring range: 0.020-8 N･m /0.20～80 kgf・cm/ 0.20～70 lbf・in Accuracy ±0.5% (499 digit or less ±3digit) Socket size □ 20mm/ □9.5mm   Pic.: CEDAR Electric screw driver Torque tester Model: DI-9M-8 at Semiki's warehouse Measuring range: 0.020-8 N･m /0.20～80 kgf・cm/ 0.20～70 lbf・in Show "Measurement mode", "Measurement unit", and "maximum, minimum, average" Switchable measurement unit 800 items of Memory data Real-time output About every 1/180 seconds Data acquisition software can be downloaded for free Include "Screw Cube"-measuring jig for manual tools [embedyt] https://www.youtube.com/watch?v=e55PI_6euoc[/embedyt] video: using Digital Torque tester DI-9M-8/08

Specification:

Maintenance and calibration :  ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Ins   DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~