CEDAR DI-1M-IP50 thiết bị đo lực mô men xoắn điện tử (0.30~50 N･m)

SUGISAKI Japan 

Digital Torque Tester 

for Air Tools & Impact Wrenches

Model:

DI-1M-IP50 ( 50N/5Kgf )

Cedar DI-1M-IP Series  torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power or manual driver. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable. USB output, auto zero reset, auto shutoff and low battery indicator complete the set of features. It is powered by an internal NiCad battery or the included AC adapter.   SUGISAKI Japan  Digital Torque Tester for Air Tools & Impact Wrenches Model:DI-1M-IP50 Range: 0.30～50 N･m / 3.0～500 kgf・cm/ 3.0～450 lbf・in Accuracy ±0.5% (499 or less digit±3digit) Management of Impact tools and oil pulse tools etc. Pic.: Digital Torque Tester for Air Tools & Impact Wrenches CEDAR DI-1M-IP50 (0.30～50 N･m) at Semiki's warehouse Features ► Suitable for Impact-based tool management. High accuracy, and portable. It is installed on the work line and is effective for periodic inspection of the tool. The blow counter displays number of blows and value of torque, and LED display which is brighter and easier to read. • Besides, it can be used for the management of the torque wrench · nut runner. • Blow counter shows number of blows and value of torque • Enable to inspect operating torque of manual preset type torque wrench etc. in peak down mode • Auto power-off function · Autoclear function are installed • Data acquisition software can be downloaded for free • Easy to read LED panel displays reference torque value in lbf-ft, kgf-m and N-m (selectable); and number of blows for selected period (0.1 – 9.9 sec) • Peak, Real Time and Peak Down measuring modes (selectable) • Ergonomic light weight, torque tester with heavy duty metal construction   [embedyt] https://www.youtube.com/watch?v=IPRbeSnbmrQ[/embedyt] Video: Cedar DI-1M-IP Series Digital Torque Tester for Air Tools & Impact Wrenches | intro

Specification

Maintenance and calibration :  ► We also have calibration certificate attached ( optional ) ► Please re-calibrate after use for a certain period through our purchase store. Local Vietnam : SEMIKI Ins   DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522 ~DOING OUR BEST FOR YOU~