Hotline / Zalo: 0979 761 016
Bảo hành chính hãng • CO/CQ • ISO 17025 | Báo giá B2B nhanh
SEMIKI Logo
SEMIKI.COM
bộ lập trình vi điều khiển ST-LINK/V2, ST-LINK/V2-ISOL STMicroelectronics Yêu cầu báo giá B2B
100% CO / CQ Đầy đủ
Bảo Hành 12 Tháng Chính Hãng
Giao Hàng Toàn Quốc 24-48h
Mã SKU: ST-LINK/V2, ST-LINK/V2-ISOL Thương hiệu: STMicroelectronics

bộ lập trình vi điều khiển ST-LINK/V2, ST-LINK/V2-ISOL

Đơn giá tham khảo (chưa VAT):
Liên hệ báo giá dự án Chiết khấu đặc biệt theo số lượng đơn hàng B2B
Hỗ Trợ Kỹ Thuật & Mua Hàng B2B Dự Án:

Cần tư vấn chọn model, thông số kỹ thuật, hồ sơ thầu, hoặc yêu cầu kiểm định hiệu chuẩn ISO 17025?

Thông Số Kỹ Thuật & Chi Tiết Sản Phẩm

 

 

 

The ST-LINK/V2 - ST-LINK/V2-ISOL

is an in-circuit debugger and programmer

for the STM8 and STM32 microcontrollers. 

 

The ST-LINK/V2 - ST-LINK/V2-ISOL is an in-circuit debugger and programmer for the STM8 and STM32 microcontrollers. The single-wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

 

 

Features


• 5 V power supplied by a USB connector
• USB 2.0 full-speed compatible interface
• USB Type-A to Mini-B cable provided
• SWIM specific features: 1.65 V to 5.5 V application voltage support on the SWIM interface
• SWIM low-speed and high-speed modes support
• SWIM programming speed rates: 9.7 kbyte/s in low-speed, 12.8 kbyte/s in high-speed
• SWIM cable for connection to an application with an ERNI standard connectorVertical connector reference: 284697 or 214017Horizontal connector reference: 214012
• SWIM cable for connection to an application with pin headers or 2.54 mm pitch connector
• JTAG/serial wire debug (SWD) specific features: 1.65 V to 3.6 V application voltage support on the JTAG/SWD interface and 5 V tolerant inputs
• JTAG cable for connection to a standard JTAG 20-pin 2.54 mm pitch connector
• JTAG support
• SWD and serial wire viewer (SWV) communication support
• Direct firmware update support (DFU)
• Status LED blinking during the communication with the PC
• Operating temperature from 0 °C to 50 °C
• 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)

 

Pic.: In-circuit debugger/programmer with 1000 Vrms digital isolation ST-LINK/V2-ISOL at Semiki's warehouse

 

Development toolchains 


STM8 microcontrollers

• IAR Systems - IAR-EWSTM8(1)
• Cosmic - Free IDEA(1)
• Raisonance - RIDE-STM8(1)
• iSYSTEM - winIDEA-STM8(1)
• STMicroelectronics - STVD-STM8(1) (using Cosmic toolchain)
• STMicroelectronics - STVP-STM8(1)


STM32 microcontrollers

• IAR Systems - EWARM(1)
• Keil® - MDK-ARM(1)
• STMicroelectronics - STM32CubeIDE
• STMicroelectronics - STM32CubeProgrammer (STM32CubeProg)
• STMicroelectronics - STM32CubeMonitor


(1) On Windows® only.

 

DISTRIBUTED BY:

 

Semiki instrumentation Co., Ltd
Email:  sales@semiki.com
Office tel: +84 28 2253 3522

 

 

~DOING OUR BEST FOR YOU~

 

 

Sản Phẩm Cùng Nhóm

MÁY ĐẾM HẠT BỤI AIRY P611 Airy Technology Báo giá B2B
Đơn giá: Liên hệ báo giá
MÁY ĐO HẠT BỤI TIỂU PHÂN 3 KÊNH ( 0.3-5.0 )  AIRY P311 Airy Technology Báo giá B2B
Đơn giá: Liên hệ báo giá
máy đo độ dày lớp phủ SANKO SWT-9000, SWT-9100 SANKO Báo giá B2B
Đơn giá: Liên hệ báo giá