BIG DAISHOWA LVM-WL thước đo, căn chỉnh độ phẳng điện tử 2 trục không dây (0.01 mm/m)

BIG Daishowa Level Master LVM-WL: 2-axis simultaneous detection leveler. LED displays level conditions for both axis simultaneously. LED and buzzer indication when leveling is completed.

• Simultaneous 2-Axis Detection: Eliminates the extra time, hassle, and cost of using two traditional bubble levels by reading both axes at the same time. 
• Ultra-High Precision: Offers a minimum read/precision value of 0.01 mm per meter (10 microns/m or .00012" per foot). 
• Wireless Connectivity: Features a remote display receiver. This allows a single operator to perform leveling tasks seamlessly from a separate workstation at a distance of up to 30 meters. 
• Optical Sensor Technology: Delivers rapid, real-time level conditions without lag. 
• LED & Buzzer Notifications: Blue LED lights and a buzzer trigger instantly to notify you the exact moment level calibration is complete. 
• Dual Modes: Includes a Low Mode (coarse adjustment within 0.1 mm/m) and a High Mode (fine adjustment within 0.01 mm/m).

[embedyt] https://www.youtube.com/watch?v=-5dqMNx7srA[/embedyt]

• • Detection Method: Simultaneous 2-Axis Optical Sensor technology. 
  • Minimum Reading Value: 0.01 mm per meter (10 microns/m or .00012" per foot). [
  • Adjustment Modes:
    • • LOW MODE: For coarse adjustment (triggers when level condition is within 0.1 mm/m).
      • HIGH MODE: For fine/precision adjustment (triggers when level condition is within 0.01 mm/m). 
  • Level Completion Indicators: Simultaneous Blue LED illumination and an acoustic Buzzer beep. 

• Wireless Range: Up to 30 meters (approx. 98 feet) from the sensor body.
• Operating Temperature: 32°F to 104°F (0°C to 40°C); Recommended: 66°F ±9°F (20°C).
• Auto Power Off: Device shuts down automatically after 30 minutes of inactivity.

• • CNC Machining Centers: Leveling the X and Y axes of multi-axis vertical and horizontal machining centers.
  • Lathes & Turning Centers: Ensuring the precision alignment of lathe beds to prevent twisting or taper errors in turned parts.
  • High-Speed Machining Centers: Setting up beds for machines utilizing sensitive ceramic bearings or ultra-precise spindles.
  • Surface Plate Calibration: Aligning granite or cast-iron master surface plates used for quality control inspection.
  • Precision Assembly Devices: Leveling robotics, semiconductor manufacturing equipment, and automation lines where microscopic tilts affect performance.
  • Coordinate Measuring Machines (CMMs): Leveling the tables of highly sensitive CMM inspection systems 

Maintenance and Support : 

Local Vietnam : SEMIKI Inc DISTRIBUTED BY: Semiki instrumentation Co., Ltd Email:  sales@semiki.com Office tel: +84 28 2253 3522